Home > Outdoor Event Party Displays > 10x10 Custom Tents > 10x10 Frame Only >

10ft x 10ft Casita Canopy Tent Steel Frame Only

10ft Casita Canopy Tent Steel Frame Only . 3 different 10 ft. x 10 ft. tent frames: Casita Steel, Casita Heavy Duty and Casita Canopy! Graphics are printed using a UV-curing process on special water resistant material.

Includes:
(1) Steel Frame
(1) Black nylon carry bag

Our Price: $164.00

Stock #: WS20435

CAS-BAGWHL

Qty:

Description

Templates & Instructions

10ft Casita Canopy Tent Steel Frame Only

Now choose from 3 different 10 ft. x 10 ft. tent frames: Casita Steel, Casita Heavy Duty and Casita Canopy! Graphics are printed using a UV-curing process on special water resistant material. Finished UV prints appear shiny and vivid, with added protection against natural elements.

This canopy is a standard 10 ft. x 10 ft. size with five different heights ranging from 10.5 ft. to 11.25 ft. tall. Telescopic legs snap into place. Legs on this steel frame are slimmer than the aluminum frame.

Casita canopies serve as an excellent way to provide shade for outdoor events. The graphic is printed on special water-resistant material and dries immediately during the even more special UV-cured printing process. Finished prints appear shiny and vivid and have added protection against natural elements.

Wind Speed Rating:
20-28 mph

This canopy is a standard 10 ft. x 10 ft. size with five different heights ranging from 10.5 ft. to 11.25 ft. tall. Legs on this steel frame are slimmer than the aluminum frame.

Features:

Square Legs have a 28mm girth
Steel construction weighs 60 lbs (frame only)

This Package Includes:
(1) Steel Frame
(1) Black nylon carry bag

Canopy Material:

Water Resistant
Vivid Colors
High quality gloss finish
UV Fabric

Finished Graphic Size:

121.5 w x 84.25 h

Shipping Weight: 70 lbs (Frame & Bag Only)
Frame Only Weight: 54 lbs
Frame & Bag Only Weight: 57 lbs

Graphic Turnaround Time: 4 Business days (standard)

Warranty:
One (1) on frame
One (1) year on graphic

Our 10ft UV Casita Canopy Allows for a wide variety of customization including:

Backwalls (117" w x 79 " h)- requires 1 rail per backwall. These can be single-sided or double-sided. They are fastened to the top of the canopy tent via velcro and they are secured at the bottom with a horizontal pole which travels the width of the backwall (inside a pole pocket) that attach to the legs of the canopy frame. Backwalls can be assembled onto any side of the canopy.

Sidewalls (114.5" w x 41.5" h) - requires 2 rails per side rail (top and bottom) These can be single-sided or double-sided. They are fastened at the top and at the bottom with a horizontal pole which travels the width of the sidewall (inside pole pockets) and attach to the legs of the canopy frame. Sidewalls can be assembled onto any side of the canopy.

Cases/bags - Our 10ft UV Casita Canopy comes standard with a black nylon bag which has a strap for carrying over the shoulder. An upgrade to our Casita Canopy bag with wheels allows easier transport where longer transport is required by foot, and an upgrade to our La Caja hard case with wheels gives the a greater amount of protection with a solid, molded plastic construction.
Sandbag Cover - This black nylon sand bag cover is used to protect your sand bag as well as to easily attach your sand bag to one leg of the Casita Canopy for added weight against wind. Included is the cover and hook. Do not fill this cover with sand. To use, slip hook through the grommet located on the handle of the cover and then close hook around leg of casita canopy. With the cover already on the ground, open velcro opening and place sand bag* inside the cover. Close velcro opening, and you're done.

Small Feather Flag 9.84' - These can be single sided or double sided. They are fastened to the legs of the Standard aluminum canopy frame with supplied flag connector brackets.
Small Teardrop Flag 8.2' - These can be single sided or double sided. They are fastened to the legs of the Standard aluminum canopy frame with supplied flag connector brackets

Finishing:
Pole pocket added to top of banner
Hemmed around side and bottom edges
Grommets added to vertical edge of banner

# CASTL-FRM10